How To Install Bali Blinds Video

Download Article

Download Article

Rather than spending large bucks to get someone to install your blinds for you, why not do information technology yourself? The process isn't as difficult as it might audio. To install blinds, measure the dimensions for an inside or outside mount and buy blinds specific to those measurements; attach the brackets using a drill, place the head rail into the brackets, attach the valence to the head rail, and secure the blind wand to consummate the procedure.

1. 

   ane

   Measure your windows. You need to do this to make sure that you buy the right size of blind.^[1] Use a measuring tape to determine the size of the window. You lot tin either mountain your blinds on the inside or on the exterior of the casing. If you hang your blinds on the outside, your window (and the blinds) will expect larger. Hanging the blinds on the within gives your window a slimmer expect. Within mounts also permit more light to shine around the edges of the blinds.^[ii]

   • Measuring for an outside mount: Measure along the outside edges of the casing that surrounds the window. Mensurate the verbal length from the top of the casing to the bottom of the casing (or to the sill if your window has one).

     

   • Measuring for an inside mount: Put your measuring tape within the casing where the glass of the window meets the casing. Measure the width of the window at the superlative, heart and bottom. If in that location is any difference in the numbers, use the smallest figure to base your measurements off of.

     

2. 

   2

   Purchase your blinds according the measurements you made. In that location are many different kinds of blinds to cull from--vinyl, PV, aluminum, wood--and the choice you lot make volition have to be based on personal preference.^[3]

   • If yous plan on putting aluminum blinds in a nursery or your child's room, make sure that the blinds you choose are painted with certified lead-gratis paint.
   • White blinds tin give your infinite a nice, clean look.^[four]

   Advertising

3. 3

   Make your mounting marks. Unpack your blinds and make sure all of the parts are there. If in that location are instructions that come with your blinds, follow them along with the steps listed here. You volition demand to make some pencil marks then that you know where to place your brackets.^[five]

   • For an exterior mount: Concord the blind up so that the head rail (the top part of the bullheaded) is centered and leveled with your window's casing (the two vertical slats that course the 'frame' of the window). Make a pencil mark right beneath the head rail on each side of the casing. You should also make a mark ¼ of an inch by the end of each head rail.

     

   • For an inside mount: Identify the head rail inside the casing. Information technology should be level--continue your handrail level, even if your window is non. Make pencil marks below the caput rail on each terminate.

     

   Advertisement

1. 

   1

   Open the subclass door and hold the end brackets in identify. Place them inside the pencil marks yous have made. At that place are two open sides to the subclass--one of them should face out towards you, while the other should face in towards the center of the window. The subclass door must face towards the inside of the room.

   • If your subclass door is tricky to use, consider trying to open up it with one of your fingers and a screwdriver.

2. ii

   Mark where yous will be drilling. Using your pencil, mark the spots where you will need to drill your pilot holes (in that location should exist 2 of them). Y'all should choose two diagonal holes to drill into so that your brackets are sturdier. Take the brackets away and hold up a level to the two holes are even.^[half-dozen]

   • For an outside mountain: The brackets should be placed on the outside face up of the window casing on both sides of the window.

     

   • For an inside mount: The brackets should be placed up against the inside top corner of each side of the window.

     

3. 

   3

   Drill the holes for the screws. Each bracket comes with two screws. If yous are drilling into wood, use a one/16-inch diameter drill fleck to make a pigsty that is slightly smaller than the spiral that you lot will use to secure your bracket. Supercede the subclass and drill your screws into place.^[7]

   • If you are drilling into drywall, plaster, physical, tile, stone, or brick, apply advisable screws, anchors, or plugs and follow the specific instructions that come with them.

   Advertisement

1. 

   1

   Snap the valance clips in place. Valance clips are used to attach the head rail to the valance. The valance is what covers the caput rail and makes it look a flake more decorative. The valance clips should exist snapped over the forepart lip of the head rail before the head rail is inserted into the bracket.^[eight]

   • Your blinds may be made upwards of 'ladders' of blinds. If this is the case, snap each valance clip into place adjacent to the top of each ladder--non directly on peak of it. If they are put directly over each ladder, the valance clips might go defenseless in the cords of the blinds.

2. 

   2

   Place the head rails into the brackets. Once you take finished drilling the brackets into place, make sure the bracket doors are wide open and and so insert the head rail into the brackets. When you lot take situated the head track, snap the bracket doors closed. You should hear an audible snapping racket.

3. 

   3

   Attach the valance. Identify the valance along the head rail in the position you would like it to be in. Rest it on top of the valance clips. When you lot have positioned it the way you would like it exist, press gently down so that the valance clips snap into the valance, belongings it in place.^[9]

4. 

   4

   Secure the blind wand. If your blinds came with a wand for opening and closing them, and it did not come up pre-fastened, attach information technology now. Push the plastic sleeve of the claw up, insert the wand's end into the hook, and then slide the plastic covering back down.

   Ad

Add New Question

• Question

  Should bedrooms accept drapes or blinds?

  

  Karen Parziale is a Dwelling Stager, Habitation Organizer, and the Founder of The Real Estate Staging Studio based in Hoboken, New Bailiwick of jersey. Karen has over 15 years of home staging and decorating experience and has staged over 5,000 homes. She specializes in project management, space planning, textile selections and builder/architect/client relationships

  

  Home Stager & Interior Designer

  Good Answer

  Take a look at the size of your windows start. If your sleeping room has really big, sprawling windows, you might be amend off choosing going with drapes.

• Question

  Which type of blinds are all-time?

  

  Karen Parziale is a Dwelling house Stager, Home Organizer, and the Founder of The Real Manor Staging Studio based in Hoboken, New Jersey. Karen has over 15 years of abode staging and decorating feel and has staged over 5,000 homes. She specializes in projection management, infinite planning, cloth selections and builder/architect/client relationships

  

  Dwelling Stager & Interior Designer

  Expert Answer

  Faux blinds are peachy! They're virtually two in (v.08 cm) thick and are a lot more stylish-looking than aluminum blinds.

• Question

  Can I mitt spiral in the brackets? I have no drill.

  

  Information technology depends on what the wall is made of. If it is wood, information technology will be very difficult.

• Question

  How do I go most installing center support subclass?

  

  Eye support brackets can be a challenge to install. However, the method I establish almost success with is to use a thin layer of gorilla mucilage to the backboard. Then you attach the centre back up subclass to the glue.

• Question

  How practise I install regular, cheap pull-down blinds?

  

  Place the stop brackets onto the blinds. Hold the blinds upward to the window top where you want them to hang; marker the window height at the edges of the brackets with a pencil. Remove the two brackets from the blinds. Holding each subclass on the pencil lines, place a dot inside the bracket holes: this is where you volition drill holes for the screws that hold the brackets. Drill (or smash) the holes where you marked. Adhere each bracket with screws, and open up the brackets. Slide in the bullheaded and close each bracket. The pull-down cord should be on the correct, the slot turn rod on the left.

• Question

  How do I install acme-mounted mini blinds?

  

  Is information technology going inside of a soffit? Anyway, usually in that location is a track, and it snaps into the brackets. Install the brackets and utilise a central signal for all brackets. (3brackets per six'+ of track) allow's say your first subclass will be two inches away from the window, install your side by side two brackets 2 inches away from the window. Hold the track with both hands put the back side in outset and so clip the front cease. I detect securing the right side first and then the left side next is the easiest fashion. Then only clip in the vertical vanes and yous are good to get.

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advertisement

• E'er read the instructions provided with your blinds.

• Get someone to assist you hold the blinds up. If you have never operated a drill, go someone who knows how to employ information technology to assist y'all.

Advertizing

Things You lot'll Demand

• Blinds (with brackets, head rail, valance, valance clips)
• Tape Measure
• Level
• Pencil
• Drill
• Screws

About This Article

Article Summary X

To install blinds, start past making marks on the wall where you desire to hang the blinds, either within the window frame or on the wall in a higher place it, depending on your preference. Adjacent, open up the door on the each mounting bracket and line it upward with the marking you fabricated. Then, adhere the brackets past drilling screws through the holes on the back of the bracket. One time the brackets are attached, snap the valance clips onto the head track of the blinds before placing the rail into the brackets. Finally, shut the subclass doors and attach the valance to the caput rail. For tips on how to measure your windows before ordering blinds, read on!

Did this summary assist you?

Thanks to all authors for creating a page that has been read 504,022 times.

Did this article help you lot?

Source: https://www.wikihow.com/Install-Blinds

Posted by: blakephouttrat.blogspot.com

Share this post